Affiliate postback test

Affiliate postback test

Updated over a week ago

Before making your campaign live, it is advised to run a postback test to confirm whether all the macros and parameters are placed successfully in the right position. Through the postback test, we get confirmation that conversions are getting tracked at our end as well as on the affiliate's end. Postback has to be updated with Trackier's macro before we add it to our panel.


Postback Test

  • Under the Action Tab, you will find the option where you can do the postback test for your affiliate.

Running the Test

  • Enter the link as shared by the affiliate. Before making the postback test make sure there are no restrictions or targeting involved in the link from the affiliate's end. If there are any, then make the changes accordingly and run the test.

Test Result

  • Once the postback test has been successfully done, it will be shown as in the below picture.

Check if the result is recorded successfully or not. If not, check the tracking link and get back to your affiliate. If YES, then it is advised to delete or cancel the recorded conversion through the logs captured at your panel as shown in the below picture.

In case you have any issues please mail us at

Did this answer your question?