All Collections
Advertiser Integration
Advertiser Creation
Making Test Conversion With Advertiser
Making Test Conversion With Advertiser

Making Test Conversion With Advertiser

Updated over a week ago

At a Glance: This guide will walk you through the process of conducting a test conversion with your advertiser to ensure effective tracking of conversions.

To track the conversions on your Trackier platform, it is necessary to share the postback with the advertiser. Once the post-back has been added on their end, it is advisable to make a test conversion to check if the server has been integrated successfully.

The test conversion is being made from the advertiser's end. All you need to do is provide them with a tracking link generated from the Trackier panel for the specific campaign.

Note: The postback test is very important before making the campaign live with traffic. It will allow you to optimise the settings and targeting made for the campaign.

Making a test conversion

  • Select the test publisher created on your panel from the drop-down space shown.

  • The generated link section will automatically create the tracking link.

  • Share the same tracking link with your advertiser to run the test.

Campaign: Tracking Link

Once the conversion test is successful from the advertiser's end, the conversion will be recorded at our end on the platform in a few minutes. To check if there is any error, you can navigate to the debug postback section on your platform.

We're thrilled to have put together a top-notch team of qualified experts who are available to handle any of your concerns and respond to any inquiries you may have. You can contact us at any time by sending an email to Trackier Support or using the in-platform chat feature.

Did this answer your question?